Installation method of ecological wood ceiling wha

2022-07-22
  • Detail

In recent years, the development of ecological wood ceiling is very rapid, which is loved by many consumers. What is the difference between it and other kinds of ceiling in terms of installation? Although the ecological wood ceiling is very popular, many people still don't understand its installation method. Next, let's learn the installation method of ecological wood ceiling

in recent years, the development of ecological wood ceiling is very rapid, which has been loved by many consumers. What is the difference between it and other kinds of ceiling in terms of installation? Although the ecological wood ceiling is very popular, many people still don't understand its installation method. Next, let's learn the installation method of ecological wood ceiling

what is ecological wood ceiling

before understanding what is ecological wood ceiling, let's first understand what is ecological wood. Eco wood is a kind of wood plastic material. Usually, the wood plastic products made by PVC foaming process are called eco wood. The main raw material of ecological wood is a new type of green environmental protection material (30% PVC + 69% wood powder + 1% colorant formula) synthesized by wood powder and PVC plus other enhanced additives. Now it has been widely used in ceilings and floors of home decoration and public decoration, and the figure of ecological wood can be seen outdoors, parks and squares

ecological ceiling is a kind of artificial wood made of fiber materials and polymer materials from resin to wood by mixing, extruding and high temperature. Compared with log ceiling, it has good stability, and physically has the characteristics of solid wood waterproof and thermal insulation

installation method of ecological wood ceiling

1. Carefully measure the length of each side of the target area for installing ecological wood ceiling, and calculate the disassembly size of ecological wood and the density size of keel in detail according to the design shape

2. Use a level meter to copy the horizontal line, check the flatness twice, and snap the reference line with an ink line

3. The material size is correct, and the required ecological wood and light steel keel are carefully intercepted

4. Analyze the core support points of the pre-designed modeling and the design hanging place, so as to reasonably and evenly share the weight of the ecological wood ceiling and increase the service life of the ceiling. The main reinforcement of ceiling shall not be less than 30× 50 wooden keel or 6-10 zinc crossing hanging wire

5. According to the calculation, drill and set out, and install the full wire suspender

6. Place the keel, and pay attention to the design of the ceiling to avoid causing trouble for the next link. Generally, light steel keel is used, and rust prevention treatment should be done. And level the keel

7. Ensure that the keel installation density is reasonable. If there is no inclination, install the base lining plate. It is generally recommended to use 5mm multilayer plate or nine plywood to fix it firmly

8. Use the prepared hardware hangers to install the prepared ecological wood ceiling

ecological wood has good stability, has the characteristics of solid wood, and has the characteristics of waterproof, anti-corrosion, thermal insulation and so on. Modifiers such as light and thermal stability, UV resistance and low-temperature impact resistance are added in the production, which can effectively resist aging. It is UV resistant and will not deteriorate or crack. Therefore, if you are installing a ceiling in your home, you can consider using this material to make your decoration life more environmentally friendly

the above is the introduction of the installation method of ecological wood ceiling. I hope it can help you. For more information about ecowood, please continue to pay attention to information

义乌男科医院

厦门妇科医院

广州牛皮癣医院

Copyright © 2011 JIN SHI